New Original AMOLED Touch Digitizer + LCD Display Screen Assembly for Nokia N9
Nokia Display Screen LCD Display Screen Assembly for Nokia N9
* n *pcs screen (which is up to the amount of the order you place)
* 1 set free tools (“+”,“-” ,T5, T6,Screwdrivers , 1Plastic Prying Tools) as a gift
* 100% high quality with reasonable price
* All items tested before shipping and with Protective package
* Replacement for your broken,misfunctional screen
The more orders you place , the better price you will get!
Warning: mobile phone as any kind on electronic device can be damaged by static electricity while the protective casing is removed. Wear natural material clothing, don't work on a carpet and try not to touch the components on PCB or the screen connector metal tabs side... and all the things you might know yourself that help prevent static electricity damage.
Things you'll need:
replacement screen
small torx screwdriver - T6 probably
something for prying things open
If you happen to have a Nokia mobile with cracked screen and you decide to replacement screen lcd yourself, then here are some pictures and descriptions of what to expect from the dismantling process. I'm not any kind of expert in mobile repairs, I just succeeded somehow and documented the process.
Screen: I got mine through e-bay from Hong Kong. It's probably cheapest. The colours on the screen in my opinion differ from original, but who cares, it's just a phone. And very conveniently it had the two mentioned tools in the kit. There are probably other places to source the screen from, find one according to your location, preference and budget.
Prying tool - preferrably should be made of plastic. Something with thin edge. Or if you can't find anything plastic then metal with smooth edge (not a sharp knife).
Torx (star) screwdriver: I measured the point-to-point size with caliper and it was 1.7mm which should be T6 according to wikipedia. But if you are going shopping for it then take the phones screen with you. Under the back part, just where battery is, there are two screws to compare the driver to. Other four screws you need to open later are the same.
Remove the backside cover. It comes off if you slide it downwards.
Remove battery.
There are two screws each in the middle of a longer side. Unscrew them.
Pry open the front side cover and put it aside.
Nokia Display Screen LCD Display Screen Assembly for Nokia N9
* n *pcs screen (which is up to the amount of the order you place)
* 1 set free tools (“+”,“-” ,T5, T6,Screwdrivers , 1Plastic Prying Tools) as a gift
* 100% high quality with reasonable price
* All items tested before shipping and with Protective package
* Replacement for your broken,misfunctional screen
The more orders you place , the better price you will get!
Warning: mobile phone as any kind on electronic device can be damaged by static electricity while the protective casing is removed. Wear natural material clothing, don't work on a carpet and try not to touch the components on PCB or the screen connector metal tabs side... and all the things you might know yourself that help prevent static electricity damage.
Things you'll need:
replacement screen
small torx screwdriver - T6 probably
something for prying things open
If you happen to have a Nokia mobile with cracked screen and you decide to replacement screen lcd yourself, then here are some pictures and descriptions of what to expect from the dismantling process. I'm not any kind of expert in mobile repairs, I just succeeded somehow and documented the process.
Screen: I got mine through e-bay from Hong Kong. It's probably cheapest. The colours on the screen in my opinion differ from original, but who cares, it's just a phone. And very conveniently it had the two mentioned tools in the kit. There are probably other places to source the screen from, find one according to your location, preference and budget.
Prying tool - preferrably should be made of plastic. Something with thin edge. Or if you can't find anything plastic then metal with smooth edge (not a sharp knife).
Torx (star) screwdriver: I measured the point-to-point size with caliper and it was 1.7mm which should be T6 according to wikipedia. But if you are going shopping for it then take the phones screen with you. Under the back part, just where battery is, there are two screws to compare the driver to. Other four screws you need to open later are the same.
Remove the backside cover. It comes off if you slide it downwards.
Remove battery.
There are two screws each in the middle of a longer side. Unscrew them.
Pry open the front side cover and put it aside.
没有评论:
发表评论